---
format: markdown
title: Petiprobe
author: Ing. Kateřina Jiráková
...

This page was last updated on 18 April 2019.

#Introduction

The petiprobe is a combined probe, assembled on tokamak GOLEM in April 2019. It consists of the [double tunnel probe](/Diagnostic]s/ParticleFlux/TunnelProbe/index) and the [combined ball-pen and Langmuir probe](/Diagnostics/ParticleFlux/BallPenProbe/index). Its name was directly translated from Czech, where it's called "pětisonda" ("five-fold probe"), referring to its five measurements: Langmuir probe, ballpen probe, two tunnel probes and a Mach probe formed by the tunnel probe back plates. Measurements and reports to come soon.

#Geometry

[<img src="http://golem.fjfi.cvut.cz/wiki/Diagnostics/ParticleFlux/PetiProbe/PG/0419PM/IMG_20190409_185121.jpg" width="200" />](/Diagnostics/ParticleFlux/PetiProbe/PG/0419PM/IMG_20190409_185121.jpg)
[<img src="http://golem.fjfi.cvut.cz/wiki/Diagnostics/ParticleFlux/PetiProbe/PG/0419PM/IMG_20190409_185157.jpg" width="200" />](/Diagnostics/ParticleFlux/PetiProbe/PG/0419PM/IMG_20190409_185157.jpg)
[<img src="http://golem.fjfi.cvut.cz/wiki/Diagnostics/ParticleFlux/PetiProbe/PG/0419PM/IMG_20190409_185248.jpg" width="300" />](/Diagnostics/ParticleFlux/PetiProbe/PG/0419PM/IMG_20190409_185248.jpg)

More photos may be found in [this folder](/Diagnostics/ParticleFlux/PetiProbe/PG/0419PM/). 

# Experiments
The petiprobe was used during the Week of Science (Týden vědy na Jaderce) to measure the profile of the plasma potential. The source code may be found [here](/Diagnostics/ParticleFlux/PetiProbe/miniproject_TV@J_source_code.py).